Showing posts with label mechanical. Show all posts
Showing posts with label mechanical. Show all posts

Wednesday, May 22, 2013

Battle lines - the power of the negative.

I have nothing to say about riding these last few days.  I've commuted back and forth to work a few times, I rode out to a old cemetery and had to take the scooter off road a bit to get the photo I wanted.  I have a small problem with my oil pan - I had the oil changed recently and it appears the drain plug nut somehow got stripped.  I tightened the nut myself but the leak continues.

All of these things are minor.   The biggest issue, the biggest problem I would have would be with West Coast Powersports, where I bought Kimmie.  My lovely girlfriend insisted that I buy the extended warranty on her.  I have to be honest, I thought it was, and still is, a waste of money.  However the previous dealership that sold me the Burgie did so knowing that the variator was bad, that it would of ran me about a grand to fix.

Because of this experience, and another bad experience we had in Florida buying a used jeep, we decided to get the warranty.  I've nearly tripled the miles that were originally on Kimmie without issue.  She actually seems to enjoy the ride as much as I do.

My issue with West Coast Powersports is this.  The company failed to process the extended warranty correctly, despite other payments going through correctly on my debit card (helmet, etc). The company failed to contact me for over 3 months in this regard. The bill, I was told by West Coast at the time, would go to collections. My bank has no record of them even attempting to collect these funds till the middle of May.

Andy, the general manager, failed to listen to me in this regard repeating that they had numerous failures trying to collect. He later admitted that the company did not have the correct authorization information. After I requested that he take one payment out and that I would pay off the balance with a money order within the week. He took two payments resulting in my account being frozen (My bank knows my history and personality. They assumed there was a problem when 2 payments came in a combined total of over $350 and froze the account as a  fraud protection measure). He then refused to release the hold. My girlfriend, whose name also appears on the account, called him only to be insulted by him. 

Not only is this extremely unprofessional but very upsetting to me. I have had nothing but warm fuzzy feelings for that dealership till this moment. I own my business and have been in the process of repairing my credit. If a payment due to me is not received in 30 days, I'm on the phone figuring out what went on. Now I will admit I was not keeping a close eye on my personal account as I do my business accounts, otherwise I would have realized there was an issue.   

Jeff, the general manager, did finally contact me after I used the only tools that are available to the consumer.  I reported him to groups like ripoffreports.com, the better business bureau, comments on the various motorcycle and scooter forums I belong to.  Frankly I hate to turn negative.  I hated to do this.  But the consumer has very few weapons available to him any more.

Jeff did state, and I intend to request this be notarized on official company letterhead to protect myself, that the bill in question would not be sent to collections.  On my end I plan to plan to pay it in full within the next few days.  I still have not received a copy of the warranty as well.  

After my dealings with Florida dealerships - only Jim Brown Chevy, where we have bought the Great Pumpkin, deserves praise - I am weary of any dealership now.  I don't believe I will be doing any business in the future with West Coast powersports.  Unless I have something under warranty that is.  

At this point I'm not sure if I will be dealing with any Florida dealership in the future.
  
In the end it's a situation that could have been avoid.  Something that should have been avoid.  I was acting in good faith and do not like being treated like I am some doddering old fool.  They don't like to have their name dragged through the mud.  If Andy would have listened to me in the beginning this how ugly situation could have been avoided.   

This issue appears to be resolved now.  I'm still not completely satisfied sadly.  I'm not sure if I could be at this stage of the game. 

Thursday, November 15, 2012

The scooter commuter

"One's destination is never a place, but a new way of seeing things."  - Henry Miller

Before I knew better!
Lately I've been thinking about how I ride.  I am about to enter my 3rd year as a rider, if I include the several months that I rode my old Zuma 125 about town.  In the first year, I concentrated on keeping myself upright and alive.   In my second year, techniques...now I'm entering the most dangerous year of all.   Where I know enough to be dangerous and overconfident in my ability.

My concern is backed up by the Hurt Report (the irony of a motorcycle crash study called the Hurt report is just to perfect) which does show that accidents are more likely in the first and third year of riding.  Having that knowledge will hopefully make me just a little bit safer.  If David Hough, who is universally considered the expert on Motorcycle safety, can get hurt then anyone can. The article on his accident is here.   The best safety device is still the one between your ears.

I also have to replace my clutch, and that is not a cheap option no matter how I look at it.  It has made me consider what type of rider I am and how I ride.  The good news is that I put a lot of miles on my bike.   If I just commute, which is 90% of my riding right now anyway, I put roughly 1500 miles on the bike a month...or 18K a year.  That's more than some bikes have in a lifetime of riding.  Susan and I made the decision to become a one car family do to our lifestyle, economics and simplicity.  My Burgman became my "car" by default.  I became a year round rider by default.

When I added it all up it just made sense to eventually get the better clutch.  Although it will run me some $400 to $600 after all is said and done.   That is not including labor.

My logic is simple.  I am to poor not to have quality.  My current clutch has roughly 25K on it, I plan on replacing it early next year.  I just hope I can get another 1000 or miles out of it.  A Dr Pully HIT clutch should last me at least 25K and more.  I intend to be on my bike for a while.  This clutch eventually pay for itself.  Sadly I won't be able to do anything about it till the new year.

Eventually I would like to get a new bike.   I'm not sure if I'll stick with a scooter or not.  Sue is pushing me to consider a trike and I've heard nothing but good things about the Piaaggio MP3 500.  Or a Can-Am Spyder, although I'm not a big fan of how they look.  Frankly I could see myself with a sidecar of some sort, but frankly all those options are at least three to four years down the road.  Susan and I want to do some touring eventually but due to her balance issues riding 2-Up just does not seem possible right now.

I would like to keep the Burgie if I do get another bike, but we will see at that time where we are in my life. All I know is that I enjoy riding.   I may never tour the county or join a club or even make it to a rally...and you want to know something.   I'm okay with that.

Being a scooter commuter is what I am and to quote my boy Jack Kerouac.  "There was nowhere to go but everywhere, so just keep rolling under the stars."

Saturday, October 20, 2012

Ah Maintenance your name is money!

Someone, somewhere in my comments section said that owning a bike is like owning a boat.  There is always going to be an issue somewhere.   How does that old joke go?  "What does BOAT stand for?"  "Bring on another thousand."

Lately I've been feeling that way about the bike.  I finally got my ugly ass in gear and had a major maintenance day on the bike.  I knew going in that this would would run me some money, after all I was finally installing the new CVT belt.  While that was open I figured I would get the final drive oil replaced, after all it had been over a year since that was done and it was time.  I had to get the engine oil changed out, the brake fluid levels checked, the front tire would also need to be replaced soon.  In other words, lots of little things that add up.

My front tire showing wear and crowning
Other than these basic maintenance needs the Burgie has been running fine.  Better than I could have hoped for really.  She needed a wash too but that could wait.

Normally I would take her to the place where I bought her, Eco Green Machine, but I had issues with them ever since the rear brake issues.  When I requested they open up the CVT casing and give me an idea on the belt life during an oil change they somehow managed to take all day and still could not get the casing off.  Even though they had a air hammer and I was there when the casing was attached with a air hammer.  I am not going to use any negative words here but lets say that I could no longer trust there work.  Nor would I feel comfortable in recommending them to another.

So I took my bike to a mechanic's shop here in town.  Frankly I could not be happier with there work so far, even though it is a little pricier you get what you pay for.  My whole bill was $180 for the work done and it only took them three or four hours for everything.   Sadly though they uncovered a problem.


This picture shows some uneven wear and tear on the clutch assembly.  If you look closely you can see where it actually created some grooves into the metal.  According to the mechanic it may have been sold to me that way or may have been assembled wrong.


Additional photo of the clutch assembly.  Notice the dark lines and groves.


Chipped and broken pieces here.  Somehow the rollers and sliders however were still in good shape.

I'm in the market for a clutch.  The price that they quoted me was for the Dr Pully HIT clutch, which is a quality part but frankly its an older bike and I am thinking that the Dr Pully clutch may, in fact, outlive the bike.  So it's tempting.

I'm in the process of getting some info now.


Sunday, August 26, 2012

Looking back and looking forward. 1 year over and done.

I was going to let the one year anniversary of this blog pass unnoticed and quietly.  Then I thought I might project myself 10 years into the future where the Mayans were right...but how the end of the world was basically a bunch of Vegan Zombie's just wanting grains!  And how a time travel kit installed on the Burgie made it impossible to be fashionably late.

Thanks to Aerostich.com
Instead I've been taking stock of all that's happened in the past year to me.  How suddenly and completely expectantly I've become a "rounder", or someone that rides their bike the entire year.  How I intended to eventually replace my car with my motorcycle...I just never expected it to be so soon.

How I have to do a "big job" on the bike - the replacement of the CVT belt (which I finally ordered and have in hand), and how confident I feel that I can do that, thanks to the friendly people at Burgman USA and some video's on You Tube (Thanks Mitch!)

I would also be lying if I didn't admit that lately all I have been feeling better about riding.  Over the last three days I've been able to do some recreational riding.  Just seeing where the left hand turn goes where I normally make a right, or what lies behind that blind curve up ahead.  Commuting back and forth on my bike is good and all but frankly I want to do more with it than just run to the store or to work.  Getting out, even if just for an hour on unexplored roads with the sun beating down in a clear blue sky has done wonders for my soul.

You would not think so...but passing by a farm that was burning something brought back memories of my parents fireplace when I was a young boy.  The wood smoke so thick in the air that I'm tempted to brush it aside like a gauze curtain.  These memories are triggered by smell and is something I don't think I would have experienced in the car.  I had not thought about these things in decades...and then suddenly I'm that young 6 year old boy shivering and wrapped in a towel that want to go back into the water as I catch a whiff of chlorine from a nearby pool.

Or how good some random drops of rain feel on the skin as I ride through the hot air.

All this is part of riding.  There are some unexpected little discoveries as well.  Like an old tattered flag still flying proudly from someone's home which speaks volumes about this political season.  Or a spot I've dubbed the "worlds loneliest train depot"  which is a single chair sitting near a railway bridge which seems so out of place but somehow belongs there.   A strange house that looks like a anthill/beehive in the middle of nowhere which has to be some sort of artists abode.  I stopped to take photos of all these things only to find my batteries were dead...so a trip back is in order.  If I can find them again, some things might only exist in that moment.

All of this comes as a revelation to me.  This reconnecting to the world, what started out as a way to save some cash has turned into something more...something new.  Reminding me that not everything has to be about work and there is always a life outside my door.  Something wonderful.  That philosophic rambling is for another time

I sit here in my house, protected from the first outlaying rain bands of Hurricane Issac that promise a couple days off the bike I count my blessings, drink my hot tea and smile.   Soon, I'll be back on the road soon and seeking new adventures.  Remembering to always check the batteries in the camera and keep my eyes and ears and heart open to possibilities 

Tuesday, August 14, 2012

Improvements.....Some I wanted to make, and others forced upon me.

One of the wonderful things about nature is it's ability to evolve.  Life is anything but static, it's a jumbled mess of parts each somehow fitting together to make a whole.   It's a 1001 piece jigsaw puzzle where your trying to match the picture on the box but your not quite sure if all the pieces are there or even if it's the right box.

So we try...and we try....but we can't get no satisfaction.   OK, let's put the Devo away for a moment.  Truth be told I am rather happy in my life.  However that happiness may be short lived.   It's time to do maintenance on and make some general improvements to the bike.  Some of this needed done and I simply could not put it off any longer, other things I have been wanting to do but it was always low priority.  Now that the bike is my main means of transport...I did some things.

First I ordered a beaded seat from Cycle Crafts.  I have a 35 mile one way commute most days and that generally does not bother me...then some days I can't seem to find a comfortable location to park my skinny a** and that bother's me.   I'm hoping that getting some air flow in those affected areas will help with my comfort.  If not then I am only out $30 which is not really that bad.  I expect to have that in within the next day or two.  Frankly I'm not to sure about the hooks and can't help but wonder if the seat will slide on me.  I guess we will see.

Somehow something happened to one of my grips, I noticed that it was starting to slip off the bike a few days ago and that the handlebar weight holding it on was coming loose.   I tried to tighten it with a screwdriver and found that didn't work  So I put off fixing it, put off fixing it, put off fixing and then.....
I drove home last night and noticed this in the morning.  Yep, completely gone. I'm not sure where, or even if, I could get a replacement but can't imagine it being that difficult (famous last words I'm sure).  This however does give me an excuse to replace the grips.  **update - I found the handlebar weights at a local cycle shop for under $12.  They went on easy and are nice and tight now.  

I've been wanting to get some Grip Puppies for a while but haven't really bothered.  Now it seems I might be in the market for some new grips as well.  I might just get some grip glue from the good people over at Scooter West.  Speaking of Scoot West I finally got me a CVT belt.  I paid about $40 less through them than the best cost elsewhere although I still have no way to put it on my bike.   At 20K + the belt has got to be wearing thin.  I'm hoping to find a mentor to help with this project.

I may also have to redo the brakes soon as well.

Here's hoping that someone in the area is willing to help me out.  I would be glad to buy them a beer, lunch, or even a lobster dinner to assist me.  It's not that I lack the knowledge, I've watched the video's and read the instructions and feel pretty grounded in the basics of bike repair.  I just lack the tools and experience; nor am I mechanically inclined despite the fact I've a background in engineering.  Moving forward however if the bike is going to be my main ride then I need to know at least the basics.  I need to understand what is happening if I hear BANG!   CLANK!

Considering how I ride some very empty roads in the middle of the night...this is a survival strategy. 

Thursday, June 28, 2012

Sometimes the simplest solution is the best - the Drink Holder .

Tropical Storm Debby has been just sitting in the gulf for some time, which means days and days of rain and wind...making riding dangerous if not down right impossible.  Their is an old saying about being ugly but not stupid and I'm not the latter.  I've been lucky enough to avoid most of the damage caused by the storm, being inland and "in the highlands" so to speak.  Some photo's of the damage can be seen here.  My heart certainly goes out to those affected.

I figured however that I should do some work on the bike that I felt comfortable with.  Mitch has some wonderful video blog entries about simple maintenance that I could do, thus I cleaned but did not replace the air filter.  I also decided that I would add a cup holder to my Burgie.  There were a couple of ideas that I came across.  Burgmanseats.com offers a simple cup holder for about $20 dollars.  A very simple cup holder could be crafted together by following these directions:  


There are also various cup holders that require a mounting bracket.  I had a lot of different options before me but I decided the take the path of least resistance.  After all it get hot here in Florida and if I planned on taking longer trips, then I needed a place for water.

If I followed the directions on the video then my cost would have about $26.82 (for the cup holder + shipping costs from Wally World since the local stores don't carry that type of cupholder) then an additional $10 for the velcro from JoAnn Fabrics.  Total cost  $36.82.  I thought there has got to be a cheaper way!  No that does not include the tile.

Kwick Tech offers a drink holder for under $7 but that requires a bag hook.  Motorcycle super store had a very nice kit for $8.95 + $6.94 shipping = $15.94. Then it hit me like a bolt of lighting!

An idea is born!
I didn't need to spend any more money than I already did. The Velcro strips would come in handy. You see, I already had the solution in hand.  Once upon a time before drink holders were standard in cars you had a plastic thing that attached to your window.  I realized I could take one of these old things and attach it to the bike.  A piece of Velcro could be cut and attached to the "crook" and to the arm to keep it in place.  I wanted to take the bike out in my hood to see if the holder would interfere with my driving, my leg and if it would hold a cup, a bottle of water and a can of soda.  If they did then I would cut and attach the Velcro and be good to go. My little ride proved my idea was sound.  It didn't interfere with the bikes operation at all.  So lets begin!

First I had to cut the Velcro to fit the cup holder.  This tends to be sticky and had to be trimmed to fit the dimensions of the cup.  



Then I had to place the other side of the Velcro onto the bike.  I had a spot in mind and it worked out rather nicely.  Again some trimming was required.  My main concern was in the "crook" area where the cup holder would hang.


TADA!!!  The final product.  Total cost was under $5 for the Velcro and about 5 to 10 minutes of time to put the whole damn thing together.  Now I don't have an excuse for a longer trip.


Saturday, May 5, 2012

Riding and commuting

In August it will be one year since I bought the Burgie.  Since then I've managed to change out the back tire, change the oil (twice), have a semi-serious mechanical failure - which was not my fault - and put the bike  down, which was my fault. Somehow I've also managed to ride 10,000 miles.

05/04/12
I started with a little under 6,600 miles but rounded up to that nice round figure.  Today I hit 10,000 miles.   Not to bad for a commuter I think and only owning my bike for about nine months.  One of my goals in the coming year is to put more miles on the bike that are "just for fun" which means riding here and there just for the hell of it.

It also means, at least to me anyway, making some improvements to the bike.  I've talked before about how I want to install a new windshield or get a more comfortable seat, however that takes a little more money than what I have right now...so I decided to invest in Malossi 21 g Variator roller weights.  On the Burgman the standard roller weight is 18 - 19 grams.  In theory this should lower the rpm's on my bike during my daily 70 mile round-trip commute and increase gas milage.  Currently, depending on conditions I'm in the high 50's to low 60's.  I hope that these new rollers will lower my fuel consumption by 10 miles per gallon, putting me into the high 60's and low 70's.  Since I will be at 20K soon, where it's recommend I replace my CVT belt, I've decided to order one of those as well but other needs like a new dishwasher, tires for the jeep and saving for a vacation are priority.  The lowest price I've found for a CVT belt is $129 dollars.  The highest - $200 dollars.  That is not including installation and labor costs.  The fact that I'm even considering doing this work myself shows my my confidence level is increasing with every mile I ride.  Six months ago I would never of thought about tearing the bike apart in this manner but thanks to the helpful folks at the BurgmanUSA forums and Mitch's Scooter blog I feel confident.  It helps that my neighbor is a retired mechanic as well.

I know longer have a fear of twisty's, in fact I seek them out now.  Where I rarely ever passed anyone on my previous Zuma 125, I do so with joy now.   I still feel a little weird at night when a car is speeding behind me, but I know longer feel a compulsion to pull over and let him pass.  Nor do I hug the right lane anymore, I feel confident in all lanes.  I do remind myself that the second leading cause of accidents however is "confidence."

At work, my heavy motorcycle jacket no longer gets odd looks when I come in and the fact that I ride in nearly every day has forced the three Harley Owners and a Shadow owner to join me, least they be teased that the "Scooter Guy" is more of a biker than they are.    Today I plan on taking the bike to Keel and Curley Winery for there Blueberry festival.  Sadly I will not have any pictures since my camera died, but I do promise to return with a nice Chardonnay or perhaps a sweet blackberry wine.


Monday, April 30, 2012

Scooter Cannonball 2012

Well this year's Scooter Cannonball is in the books.  Congrats go out to all the riders that made the journey from Savannah, GA to San Diego, CA.   I've a feeling that the 2014 Cannonball will be bigger and better than ever.

It was a lot of fun reading about their adventures on their individual blogs (the links are available on the main page) as well as forums like Modern Vespa and Burgman USA.  I know many of the riders have made lifelong friends and at least one had this as a bucket list item.

Again, congrats go out to all the riders and they adventure they had.

Saturday, March 31, 2012

For the want of a bolt

A few days ago I took the bike to have the rear wheel replaced.  Some young guys did it and I have had maintenance done by this shop before.  What could go wrong?
Answer:  Something simple, something that could have been overlooked but should not of been.  When riding a motorcycle of any sort a simple mistake can quickly become a disaster.

To make matters worse, when I was riding away from the shop something just didn't fee right.  I gripped the left hand brake lever to give it a squeeze and it just felt off, if felt "soft".  I shook my head, thinking it was just the new tire, a figment of my imagination.  On the way home the ride was beautiful, wonderful, joyful.  The new tire seemed to be working wonders on the twisty roads I followed home, so I put the brake issue behind me.  Thinking it was just me breaking in a new tire.

Then another day goes by, it feels right as I commute on the mostly straight roads home.  Then today I worked early meaning I would have to ride in rush hour traffic.  I didn't bother with the T-clock inspection.  I wish I had.  I may have caught the problem, or it may have been overlooked.  I don't know.   I knew I had good oil and tire pressure.  My light worked, my kickstand was solid.
So I left, feeling good and entered traffic for my thirty plus mile ride to work.  When I had gone about twenty miles I reached for the brake...it was not there.  Nothing.   I had no rear brake at all.

I was within ten miles of work, I could make it with just the front brake.  I rode on running through possible problems in my head.  Did I have enough brake fluid?  Did something happen that caused the brake fluid to leak or bleed?  Were the brake pads that worn?
With five miles I heard the sound of metal rubbing on metal when I applied the rear break for a test.  I made it to work, looked and then looked again.  A bolt was missing on the rear brake caliper.  This in turn lowered the caliper OFF the rotor.  By pushing the brake the piston pushes the brake pads out and since the rotor was not stopping the pad, it pushed the piston all the way out.  Since the pads did not push back the handle did not have pressure.  Since the caliper if off the rotor, it was rubbing on the rotor making the grinding noise I heard.

In other words...for want of a bolt I could have really fucked up my bike and myself.

Sometimes it's better to be lucky than good.

What happened next was a series of phone call, to the shop that did the original work.  They told me they couldn't send anyone out to pick it up or even fix it for me as it sat in the parking lot of work.  It was my only ride home at the time, and I was not going to risk riding home without 1/2 of my brakes...plus I feared what would happen if something came loose and got caught up in the back wheel.  A high side fall would not be good.
Towing was covered by my insurance company so I had the bike flat-bedded to the shop.  At this time I don't even know if the shop has a bot to fix the problem although I think they do.

Funny thing is that even though I feel it's the shop's fault, they should have caught something so simple...they should have done the job right the first time.  I'm madder at myself.  I learned a few things.  One thing is that I'm confident enough in my ability as a rider to handle what could have been a very bad situation and that confidence is not always a good thing.  I also learned that T-CLOCK is there for a reason and needs to be done every time.  No exceptions.

Tuesday, March 27, 2012

Updates, I do updates.

Finally got a chance to sit down and discuss the activities of the last few weeks.  I've been busy with work, projects and other odds and ends.  It's feels good to get behind the keys of the old computer and write a little.
A few things to discuss.  I like my new rear Pirelli Diablo tire.  I can see why it's the unofficial favorite of riders on the Burgman forums.  I've never really noticed how great a difference in tires can make.  Change a tire or two in a car and frankly I don't see any improvement in performance.  Changing the back tire really did make a difference.  Maybe it's just in my mind but the bike seemed to grip the road more.  The lean angles seemed more stable.   
While the bike was up on the rack the mechanic mentioned that the exhaust gasket was going to need replaced.  Which started me thinking, what else can I get fixed.  The CVT belt has been on for 15K, the owner's manual states it needs replaced at 14K or so.  So they ordered that for me as well.  The late Gary B and I discussed Dr Pulley sliding roller weights.  He suggested upgrading from the factory model to a higher weight as they reduced the RPM's.   Lower RPM's of course increase fuel mileage...and since I ordered the CVT belt I figure "what the hell."   Just don't tell the GF I'm sinking $100 dollars or more at once into the bike.  I've not ordered the parts yet...but giving it some thought.  
Sadly Gary also borrowed by owner's manual before his untimely death.  With the holidays and with everything else I never bothered to ask for it back.  I was able to order one via the local Suzuki dealership.

I've been kicking myself over last Saturday's Scooters 4 Hooters ride in Orlando.  My girlfriend is a survivor of Ovarian cancer and any group that helps find a cure to any cancer is near to our hearts.  I had a rare Saturday night off and learned about this rally to late to do anything about it.

Team Scooter Trash is entering the soon to be famous 2012 Scooter Cannonball.  These are locals from the Tampa area and I certainly hope they finish the race and do it in a grand manner.  You can follow their progress on their website and I believe they will be making updates to the St. Petersburg Scooter club website as well.
Another Burgman rider and his wonderful wife will also be riding in the Cannonball.   Considering how this just might be his last great adventure - he was diagnosed with two serious life threatening forms of cancer.   He's bit it so far, but in the end we all know who will win.   I would love to give out more information about this but he has asked me not to for privacy reasons and I respect that.  

So here's hoping all 60 plus riders return safely and with stories to tell.

Tuesday, March 6, 2012

Thinking of buying a scooter? Want advice?

I write this blog because I am still new to the joy and the art of motorcycling.  I have questions and concerns and hopefully someone just as new or newer than me stumbles across my pitiful attempt at being helpful.  If they gain some new knowledge or somehow avoid making a mistake that I made then wonderful.  


So with gas getting close to and, as your reading this, probably over $4 a gallon I thought it best to give a little run down on what to look for if your thinking about life on two wheels.  I’m not going to say Brand X is better than Brand Y, that’s not my job nor the purpose of this entry.


Basically, if you were to come up to me on the street and ask me for advice on buying a scooter my answer might surprise you.


1)         Do not buy a scooter based on gas mileage alone.



Buddy's all in a row.
Okay, so you want to get somewhere between 50 - 100 miles per gallon.  You want to save money I understand that.  But do a little research first.  For example what is the speed limit on the majority of roads you drive on?  Is that speed limit more wishful thinking or is it accurate.  If you’re driving a little 50CC over 50 miles round trip down the highway with cars zipping past you at 75 miles per hour…it may be time to reconsider your choice of scoot.


That being said, buy a motorcycle or scooter based on what you want to do.  Don't buy something that is to powerful for you either.  You don't need 1200cc between your legs to make you a man if your not comfortable with that type of power.

What do you plan to use your Scooter for?  Commuting?  Touring?  Errands?  I was very surprised to find that, over time, my riding changed.  I started as a simple commuter, and now I would rather take the bike out than the car.  Your mileage may vary.

2)         Get endorsed and Gear Up



To make it as simple as possible, this might save your life.  It will also break you of some bad habits.  Well motorcycles and scoots are great fun and a form of cheap transportation the truth is that jackets, helmets and other things are not.  A good “cheap” armored jacket might run you $125.  A really good helmet about the same.  Gloves vary in price and frankly I'm not sure why.  Find a pair that fit and your comfortable with.  Boots can be found cheaply (for example I got mine at Wal-mart), just make sure they are waterproof and have oil resistant soles.


These are a one time expense.  Wear them all the time.  Hence the term "ATGATT" which stands for All The Gear, All The Time.


Scooters and motorcycles are dangerous, have a lower profile than your car and don't react like a car does.  Preparing for that moment when something goes wrong, and it will go wrong, just makes common sense.




3)         Are you a gearhead?



I’m not a gear head but I learned a few things because motorcycles and scooters can be expensive to work on.  For example an oil change in your car can be done by your local mechanic for roughly $20 US dollars.  An oil change on your bike might be twice that.
You can go through life not ever learning how to do something, learning to change the oil and other basic maintenance is just part of owning a bike.  Motorcycles and scooters are not that common (yet) and frankly your local mechanic may not be qualified to work on your ride despite the fact he's worked on your car for 20 years.  Learning how to do basic maintenance is a requirement of owning a bike.  If your not willing to do that consider public transportation.  


4)  Are you willing to suffer?


You will be hot.  You will be cold.  You will be wet.  You are exposed to the environment and have to make a choice to accept that.  


5)  Are you willing to have a smile on your face for the rest of your days?


Because you will.  


If your willing to take some advice, then I think your going to not only save money but have a hell of a good time doing it.  

Tuesday, January 24, 2012

Personal milestones

It really is not a big deal, not worthy of celebration or a press release.  However I'm happy with myself, so I'm putting on my party hat.

When I first bought my 07 Suzuki Burgman it had a little under 6600 miles on it.  The previous owner had taken 4 years to place that many miles on it.   Yesterday I doubled that figure in just a few months.  That tells me I'm riding the bike nearly every day which was my goal.

On my next day off I'll be doing my second oil change, the first I'll do without assistance.  Considering I'm not mechanical in the least, this is a milestone for me.

I am to a point financially where I can start making improvements to my bike, things like the GIVI windshield and the much talked about but yet to be purchased seat to prevent the deadly numb butt.  My bike needs a little bit of cosmetic work and I've found a few painters that are willing to fix it for me.  The price is yet to be determined but again, it's something I'm willing and needing to do.

I'm still not to a point to where I feel I can handle the interstate's - I do not mind traveling at highway speeds but don't feel comfortable traveling on the interstates yet, but I do feel that I can handle longer rides now.  One hundred or more miles is not as daunting as it once was.  The point is, every mile under the bikes tires makes me a little more confident and secure in my ability.  I'm feeling it's time to stretch out and do more with the bike than just commute.  It's time to go somewhere.

Monday, October 24, 2011

The return of the shade tree mechanic

Growing up in the 70's and early to mid 80's when my Dad had a problem with his car he took it down the road to a guy named Dan.  Dan worked out of a barn in the back of his house, or on a warm spring or summer day, under a big old oak tree my brother and I loved to climb.  He was literally a shade tree mechanic right down to the ever present bottle of beer.

I am not mechanically inclined.  It's not that I don't understand the principles of it, the weird thing is that in my life I've been a lab rat.  I worked for years as a civil engineering tech and now work for a GPS company.   I understand tech.  I speak tech.

Just don't ask me to actually fix or repair anything.  I find humor in the fact that I know more about how the road under my wheels is constructed than the machine I'm riding on it.

When I bought my scooter I knew that had to change.  I've done minor repairs in the car, "How difficult could it be to change the oil?" I thought.    Well truthfully in the Burgman, not hard at all.   Although I did quickly learn that some things I would have to do in the future were going to require more than a Phillips head screwdriver and a wrench.

The oil change itself was pretty simple and my thanks go out to Gary for walking me through it the first time, although after watching him do it I think I could have handled it.

He also pulled apart the CVT which started me thinking how little about the machine I decided to ride.  If there is a squeal I know I can sit and think about it and identify where it's coming from...even be pretty sure what's causing it.   Fixing it...not so sure and mechanics love to see a rube like me coming!

I understand the physics of it...the principles of my bike.  I know that if I take the time and invest the energy I'll be able to fix the minor problems, change the oil and even seek shade under that old tree.  If I invest the time and energy.

OK, maybe not the shade tree mechanic I had in mind
What modern car dealers don't want to tell you is that, Dan - remember him - does not actually exist.  Things today are all electronic do dads and whatit's.  The mechanic today is more of a computer diagnostics person than the proverbial grease monkey.  Watching people work on their bikes harks back to a simpler time.

Their is an amazing community of "gearheads" out there.  When a strange black streak appeared on my variator the first thing that popped into my mind was that the belt was not seated properly and rubbing against the metal.   That could either result in a broken belt or replacing the variator itself.

As it so happened that mark appears to be a normal thing, as Gary posted the pics and question to the Burgman USA forums and had an answer within a few hours.  So I feel pretty confidant moving forward that if I have a issue or question I can get the answer.  I feel that I can work on this bike, or at least ask the right questions if I do take it to a mechanic.